UV Cured Varnish for Timber Moulds
Benefits of UV Cured Varnish
Eliminate Drying Times
Instant UV cured varnish means timber moulds can be used immediately after cure to significantly reduce processing and lead times.
Reduced Lead Times
Being able to use your timber moulds immediately means lead times can be significantly reduced, increasing your production rates.
Photocure Varnish is made of solids, no solvents are used and is less harmful than common varnish.
Less Coatings Needed
Photocure only requires 2 coats
whereas typical varnish requires 3, saving you time and money.
Save Time & Money
UV cured varnish reduces processing and lead times and can save thousands every year compared to current methods of timber mould varnish.
Opportunity to Automate
Photocure Varnish can be applied by spray or roller machines and cured on a conveyor to increase production times even further.
Why UV Cured Varnish?
Photocure Varnish is created to help architectural cast stone and concrete manufacturers significantly reduce varnish drying times and therefore increase production and decrease lead times. The UV cured varnish can save time and money for manufacturers.
Photocure Varnish cures instantly under a UV lamp to form skin-tight protection for the timber moulds when they are in use. The UV cured varnish will allow for immediate use of the moulds.
Photocure can be applied and cured by handheld equipment as well as machines. Automated sprayers and UV lamp conveyors speed up the varnishing process even further to help save time, money and reduce labour.
Photocure Varnish does not contain any solvents and is, therefore, more environmentally friendly than typical solvent-based varnish.