SPRAY ON window film
Quickly applied by airless spray gun, taking approximately 49 seconds to apply per m², making it FIVE times faster to apply than protective board and TWICE as quick as applying protective film.
DURABLE PROTECTION
Protectapeel window film provides 12 months of air-tight protection that maintains its adhesion, protecting your surfaces from damage.
PEELABLE COATING
Protectapeel is easily condensed down into a small ball for disposal, or you can return it to us for recycling for free!*
*A minimum of 50kg of used material is required for free collection
The Difference Between
Protective Film, Protective Board & Protectapeel
Protective Film
Applying protective film can be
time-consuming due to the need for measuring and cutting to size.
​
Protective film for glass often loses adhesion over time, leaving surfaces vulnerable to damage during construction.
​
This loss of adhesion can lead to additional costs for repairs, replacements, cleaning, and potential project delays.
Protective Board
Applying protective board takes about 4 minutes per m². The process involves measuring and cleaning the surface, cutting the board to the appropriate size, and securing it with adhesive, pins, and tape.
​
Additionally, protective boards do not offer air-tight protection, allowing dust and debris to accumulate behind them, which can further increase cleaning expenses.
Protectapeel
Applying Protectapeel with an airless spray gun takes approximately 49 seconds per m².
​
Protectapeel provides 12 months of air-tight protection that maintains its adhesion.
Dust and dirt are easily removed with the coating, leaving surfaces clean, undamaged and ready for handover!
Our cost comparison has shown Protectapeel not only saves time, but is also 40% cheaper than using protective board and 73% cheaper than using protective film!